Ok ladies. How many of you have things that have been sitting in your garage for months (or years…ahem) that you keep meaning to get around to but are maybe also slightly intimidated by?
My hand is in the air right along with you. I’ve been toting this rusty, busted up radio to shows with me all summer (and listening to my husband tell me to trash it every time he saw it or moved it). I pulled it out of an old house in Utica when Charlotte was a baby, and my ideas for it have gone through several revisions in my head.
Until Christina needed a card box for her wedding last month, however, I had no motivation to actually get it finished. And, of course, I waited until basically the last minute (the Monday before the event) to get it done. I took plenty of photos along the way, because there was no way that I wasn’t sharing this major triumph with all of you.
Here’s my vintage radio shell upcycled into an adorable wedding or shower card box:
This piece was disgusting. I’m talking it was caked in several layers of grime. The house where I found it had been basically abandoned for twenty years, and everything in it was really, really dirty. I’m pretty sure that there were various animals living in it when the grandson finally got around to cleaning the house out and putting it up for sale.
Most of the radio’s guts were long gone, and what was left was really rusty and basically impossible to salvage. To be honest, when I saw this thing laying in the front yard of that Utica house, I probably should have just left it there, but I was drawn to the shape and the details on the front—there’s just something so romantic about an old radio to me. So I tossed it in my van and saved it from being trashed.
Fast forward three years.
The first thing I did was spray it down with the hose to wash the first layer away of dirt away. I still ended up with several rounds of super dirty rags before it approached some semblance of being clean.
I used my jigsaw with a metal blade to get rid of the guts of the radio before the final wipe down.
There were obviously some sharp edges left over, but the screws holding this metal ring in place were still there, which made a future step much easier than I thought it would be–more on that later. I left the sharp edges for now, since I wasn’t messing around inside the radio much. I figured I’d sand them down a bit later, or else tape over them if they seemed too threatening.
I had to glue a few of the little pieces back on, and then I gave it a few coats of Rethunk Junk in Cotton. I know what you’re thinking—no Annie Sloan? Girls, I’m loving Rethunk Junk right now for certain pieces, and this was one of them. I also used this paint on my newly redone kitchen table and some of my chairs, and I love the cleaning product, paint and sealer, especially for a piece like my table, which gets a lot of traffic every day.
With Annie Sloan, I really feel like these old pieces with the deteriorating finish are going to bleed really bad through lighter color paints like Old White, but the prep product for Rethunk Junk seems to sear all of that stuff away pretty well. There is a small brown spot on the front of the radio that came through the paint, but I distressed it in that area and it doesn’t really show up super dark. I might do a compare and contrast post for these two paints at some point in the future, because there is a lot more that I want to say, but I’ll leave it at that for now.
For the card slot, I drilled a hole in the top of the radio and then used my jigsaw again to cut a rectangular hole across the top of one side. What the photos don’t show is that, like a dummy, I did this while the paint was still wet on the other side of the box…yeah, that’s right. I’m a total spaz. I would just say that I was so excited to finally be putting this together that I just couldn’t help myself, but really, it’s probably that I just wasn’t thinking. At all.
I used my jigsaw to cut a piece of wood for the back, and then cut that piece into three pieces for the top, the side, and the door.
Remember how I said that the little metal ring on the inside still had the screws in it, and how they weren’t rusted past recognition? That made it super easy to remove the bits of old fabric that were still hanging on around the edge of the speaker, cut a little circle of this vintage lace that I’ve also had for years, and then put the metal circle right back over it to hold the new fabric in place.
Now that it’s over, I have no idea why this project was so intimidating to me. It could be that I didn’t really have much to go off of when I was putting this together–I couldn’t really find a tutorial or a photo for inspiration anywhere, like I often do when I’m up-cycling or building a piece for a customer.
I was surprised at how smoothly the whole thing went, too–I didn’t really hit a snag like I often do with other projects, and the metal ring made what I thought would be the hardest part into what was actually the easiest part.
The card box fit in perfectly with the rest of the decor–it was even more adorable than I thought it would be. The last thing I did was use my Cricut to make a Kraft paper and twine “cards” banner for the front of it.
I’m not sure what I’m going to do with the box now that the wedding is over. I halfway want to keep it, but honestly, what am I going to use it for? The occasional wedding? Every party that I ever throw from now on? My practical mind is telling me that I should just list it in my Etsy shop and let it go, but my emotional mind is telling me that I’ve held on to it this long, and worked so hard on it, and that I’ll probably use it again someday…
Now it’s your turn. Tell me about that project that you had (or have) sitting around for years before you finally got around to it. Why did you wait so long? How did it turn out? Was it easier or harder than you imagined? Did you do it for yourself, or for someone else, and do you still have it today?
Thanks for reading!